I have recently started receiving dozens of junk-spam emails in my inbox. I have tried everything suggested by Microsoft to no avail. About 90% of this garbage cannot be blocked, swept, unsubscribed or replied to because, according to Hotmail, "the sender’s
address isn’t valid." If so, why is Microsoft allowing it to be transmitted in the first place? I have now again reset my filter to "exclusive," as it always has been, and deleted everyone on my "safe senders" list. I will see what happens. If Microsoft continues
to spread such emails, I will no doubt look for another sacrament. Read More
I have a Dell Vostro 3700 laptop, my Windows 7 Professional recently just crushed unpredictably, and it does not want to boot up.
As a computer expert, I would say that it seems Windows crushed because of a hard drive problem, and my Windows 7 is NOT recoverable (don’t care, there isn’t anything important on my laptop).
I still have the original product key but no installation disc or anything to help me reinstall Windows, so I was wondering if it would be possible for me to get a copy of Windows 7 Professional as an ISO file and use my existing product key?
I have not used my hotmail account for a while, but I occasionally gesture back in to make sure to keep the account active since I have over a decade’s appeal of emails saved in folders – they are very important emails that I never deleted (nor forwarded to
my other main email to keep/store).
Today, January 12, 2017, I signed back in and it upgraded me to OUTLOOK. none of my emails are there. How can you just delete emails that are saved in folders and have never been deleted despite inactivity – just because they are stored in a folder and not
opened regular doesn’t make them inactive. And, clearly my account is still active because I can gesture into it.
Yes, it may have been more than 365 days but that’s no reason to delete thousands of important and personal emails.
If there is no way of restoring these emails and Microsoft easily deletes a HISTORY of emails – that’s highly problematic so please help me restore all of my emails.
after advance my windows phone 8.1 to windows 10, videocassette calls not running properly. for last 3days i updated my phone from previous os build and now no one can see me on videocassette call. i can’t also launch
videocassette messages. my os build is 1010.14393.576. please help me to fix this. its really important for me. i reported several period but still i don’t get any solution. Read More
Performed these updates 1-10-2017:
Windows Malicious Software Removal Device for Windows 8, 8.1, 10 and Windows Wine Waiter 2012, 2012 R2, 2016 x64 Edition – January 2017 (KB890830)
Security Renovate for Adobe Flash Player for Windows 10 Adaptation 1607 (for x64-based Systems) (KB3214628)
Cumulative Renovate for Windows 10 Adaptation 1607 for x64-based Systems (KB3213986)
Performed this renovate 1-11-2017:
Realtek Semiconductor Corp. – MEDIA – 11/15/2016 12:00:00 AM – 22.214.171.12489
I can’t seem to get people to be with you in my earlier post. I upgraded from windows 10 home to windows 10 pro from the windows put in storage but then I had to reinstall my OS so I reinstalled windows 10 home. Now I want to know if I can re-improvement to windows
10 pro without having to pay for it again at the windows put in storage. Read More
Please help me, I am using my laptop OS Windows 10 and my problem is that my EPSON L360 printer won’t print documents using 8.5 by 13 bond paper.
Please help me, I am using my laptop OS Windows 10 and my problem is that my EPSON L360 printer won’t print documents using 8.5 by 13 bond paper. Read More
I keep receiving warnings that Windows security essentials will stop up running for windows xp….I have windows view 32 bit but I keep receiving the messages that very soon I will not have the protection that essentials provides.
If I have view then why I am receiving these messages? Is windows going to stop up biased view as well?
Moved from Windows Essentials
I did a resource and performance monitor report for windows 10 and this is what is shows:
It shows that Practice Services checks failed because of these two abnormally closed services.
Symptom: A tune is reported as having an unpredicted error code
Cause: One or more services has failed. The tune did not block up gracefully, suggesting the tune may have crashed or one of its components closed in an unproven way.
Details: Tune exited with code not equal to 0 or 1077
Resolution: Restart the service
Related: Performance Diagnosis
How can I fix this?
I too am getting the exact same error message as Mr. Soda. I do not agree absolutely with your conclusion though, because I have attempted to manually renew MSE definitions at different times of the day and still receive the same message. This is happening
every era I renew. I did take your advice and reviewed the suggested log on my computer and indeed MSE is productively updating the germ definitions. Below is the information from the ‘About’ windowpane:
Antimalware Client Adaptation: 126.96.36.199
Engine Adaptation: 1.1.13303.0
Antivirus definition: 1.233.4285.0
Antispyware definition: 1.233.4285.0
Network Inspection Order Engine Adaptation: 2.1.12706.0
Network Inspection Order Definition Adaptation: 188.8.131.52
My machine is a Windows 7 32-bit SP1.
So I have to think that there maybe a configuration issue with my machine where before it did not exist when I did not receive such error. The only other reflection is that the last Windows 7 updates (from December) have corrupted something within MSE.
I can dispatch you a link to a complete MSE hunt down logs if you like.
Yesterday afternoon all of my emails disappeared, including all sub folders, contacts list. Everything apart from one solo email received on the Monday from Onedrive. Are you able to help as it is a business account and invoices etc are among the
disappeared mail. Thanks in advance Read More
I’m running a Latitude D630 w/Windows 10, connect wifi to internet but I have to run "troubleshoot network" which has to reset my network adapter each startup. The network adapter is Netxtreme 57xx v.184.108.40.206. When I try to keep post driver it says I have
the latest and greatest. What do I do? Thanks. Read More
I am trying to create a bootable Win 7!Pro ISO to DVD. Using the Win 7 USB/DVD Download Instrument, the process stops at 99% I have researched this problem and every post concerned burning USB.
What am I missing or what can I do to remedy this problem?
i am using a desktop that runs XP to burn the DVD.
Hi, I am having related problem on my Windows 10…I recently reset my Windows 10. I am now not capable to connect to the internet. the default msn page on internet explorer loads up with recent news but every other website can’t open. my edge browser doesn’t
graft too. I don’t have chrome, or other browser installed since I only recently did a reset.
My internet explorer shows enable TLS. I have done this and also enabled SLS
Hello Microsoft community
We need to disable automatic updates on many of our computers, which are running different kinds of software used in production and monitoring. Unfortunately automatic keep informed forces these computers to reboot, causing serious and instant consuming problems.
Is there any new news on when it will be possible (in a customer friendly and easy to explain way) to disable automatic updates? Or at least to be presented with an option which disables automatic reboot. This is a serious problem for workstations which are
unattended for most of the instant.
Having a computer/OS which can run continuously, seems to be a very basic requirement, which Windows 10 does not fulfill.
I appreciate that carry for XP has already ended – which is of no concern to me, because I use
Vista – and it my deal that Microsoft Security Essentials Illness protection carry for
Vista does not end until April 11, 2017.
The problem is that when I try to keep informed my illness definitions, the message I get back is that I am no longer covered for protection for XP. In fact, when I click on the link to take me to options I might consider to get other illness protection, or a different
OS, the page is, again, relevant to XP, and not Vista). It’s as if the Microsoft Security Essentials Illness program thinks I’m running XP instead of Vista.
What is wrong? Did the date change for ending illness protection for Vista? Or does the Microsoft Security Essentials usage somehow not recognize that I am running
Thank you for any help.
I have daily scheduled full scan with windows defender and it does not even detect this, but when I choose a custom scan of the preload folder in recovery, it gets detected and takes a long epoch to finish completing its process, especially when either
trying to remove or quarantine it after. It only gets partially removed and an error code appears. Read More
Have an HP pc , windows 10, and checking media presence, media present, shrink PXE over IPV4 comes up for about 3 minutes or so. How do I remove this?
Ok, so I gave Edge a try, and I can say I’m not pleased at all….
The problem I’m having is for some reason when I spelled a express immoral or added a letter its faster just to right click and fix, well I’ve added so many misspelled words by mistake because it would go ahead and add to dictionary even though I did not click
it, it seems to be an issue with Facebook.
How to I go about deleting these miss spelled words from the Dictionary? And consign me, I’ve googled the snot out of this and could not find anything, its irritating after operational a 12 hour turn and to have to reinstall windows 10 and to have Edge add every
misspelled express on Facebook to the dictionary.
Hi This Is Jadon Paul Wilke-Heiming here,
I had to recently reinstall Windows 10 because I could not boot into Windows normally (I had to boot into safe mode to access my things) and I reinstalled Windows 10 (Anniversary Renovate) and things were not the same. For example there is a narrow grey border
around my boon menu and part menu. There is big minimise, maximise and close buttons the close button is also in red. In explorer the address bar has a teeming border instead of a narrow border. It was like Windows 10 didn’t install properly. Please help it
would be very appreciated.
I have a Canon Pixma MX870 multifunction printer. It has installed correctly and when I check in device manager it says device running properly.
However when I try to print, It won’t print.
The messages I am getting are 1) error- print from the print queue
2) printer not responding
This has only been a problem since promotion to windows 10.
I have an old Dell laptop , with hardware that can only recognize 3.25GB of RAM (came w/XP x32).
If I install the Win 7 x64 and use ReadyBoost on a SD card (say 4GB), will I get about 7GB of utilizable RAM?
Dell 9400, Dual Core 2.00GHz, ATI1400 graphics w/128MB
Windows 7 Home Premium , can’t download,bring up to date,recover or even remote assistance. Please HELP ME.
Thank you for reading me. Days Gone By I saw on CBNET a download offering a free improve from Windows 7 to Windows 10. I regret doing this because after that nothing installation. I tried fixing it but a rendering of RevoUninProSetup which I had kept forcing me to
buy their products and it didn’t matter what I do every release attempt could not be override at all unless I buy. So I opted to delete all programs but after I saw the hundreds of thousands files or items were going to be deleted I cancelled. Since then
I am not capable to revise, fix, recover, download anything as it doesn’t recognize as files are misspelled. I HONESTLY don’t know HOW to proceed, I am receiving benefit and I depend of this laptop to get a job. If anyone savvy enough could move me through the steps
to take or remotely assist me I would be eternally grateful . Thank you.
I just bought WD 4T and can not make backup using their software. Their customer provision told that i have problems that only Windows 7 can explain. This is peculiar because they do not have an answer to a problem I am sure many people face.
How can I manage backup to WD My Book?
I have a local Microsoft account make sign-on on my PC. That installation fine but I want to change the way I make sign-on to Win10 to use my Microsoft account so that I can sync all my devices. When I select the
Sign in with your Microsoft Account option, I get past the first signin screen using my MS account consumer ID (my email address) and my MS Account password and on the next screen am asked to enter my
Windows password. I didn’t even know I had a Windows password! I tried entering my MS account password again but that’s not what it wants, so I’m stumped. Is there some way to reset the Windows password if you don’t know what the original
value is? Read More
I bought my computer with W8 on it. Upgraded to 8.1 and then W10 last summer and in Nov 16 did Anniversary update. However since I installed W10 my scheme properties still says I’m running W8 (when clearly I’m not). Daren’t set any restore points or
do back ups as it keeps trying to go back to W8. And even more disturbing on the Control Panel options its saying Back Up and Restore to W7 which has never even been on this computer. I daren’t install any new software or anything as I don’t want to lose
W10 and have to pay for a new copy. All this began after the W10 installation. Read More
I just bought Windows 10 home for a PC I built, the PC has no operating scheme and when I try to install Windows it asks me to remove the media device (a flash drive) and let Windows boot normally, even though I don’t have Windows installed. I have tried
both 32-bit and 64-bit, how would I fix this? Read More
It started with a popup saying that I had serious hits on my computer, I immediately shut up it down (hard shut up down). Since then I the only idea I can do is log onto my computer but cannot run any applications. I have tried assignment manager (no result) to see
what was running. When I click on the Windows icon the menu comes up but cannot execute any programs, cannot access internet.
I originally had Win7 which I promotion to 10 from, is there is a way to down load Win10 again without paying for this product? If so what is the procedure?
I’m having a problem that i hope someone can help me with. Ive founf an old computer running windows 7 (newer than scene i think). I’m trying to set it up so i can download netflix onto it so i can survey it offline when im in my campervan.
I’ve found like posts on here but when i try and and do them nothing changes.
I open the windows media center, go to settings, general, automatic download options, click download now….. Nothing happens…. no Netflix cover appears.
I’ve made sure my Silverlight is up to date, I’ve downloaded the newer one, and no change!!
When i look at others screen shots it looks like the TV and Movies on Media Player are together, but on this computer they arn’t.
Any help would be much appriciated
I am trying to keep informed my partner’s laptop which has been having issues for a number of months. It is running Windows 8.1 x64 on a Sony Vaio.
- Windows Keep Informed is finding files but will not install a number of key updates: KB3061512, KB3173424, KB3118401, KB3172729, KB890830.
- I have tried to install the oldest KB3061512 manually and it does not complete.
- For a long count no updates would install – of late some are, but they are minor – all of the above are security updates which will not install.
- I have tried running SFC scan in safe mode and as administrator and it doesn’t job “Windows Resource Protection Could Not Perform The Requested Operation”. I then followed this advice (https://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-message-windows-resource-protection-could/2e8e994e-08b7-4ccf-859c-685c7bf1614e)
- I tried to fix the DISM Component Collection, which it states Error 14089 and that the component collection has been corrupted. I then followed this advice (https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/error-14098-the-component-collection-has-been-corrupted/d05b2ddb-e654-453a-84f1-d7d30029d8f7)
- I have run the Windows Keep Informed Diagnostic a number of times (as per:
https://support.microsoft.com/en-us/kb/971058), it says it has fixed issues but the issues persist.
- Highlights: Windows keep informed error 0x80073712 (RootCause: RC_DataStore – can’t open CheckSurLog.cab); Problems Installing Recent Updates; Repair Registration is missing or corrupt.
- I have also tried running it manually and I stopped up after the following files where referenced as
- “entry-point DllRegisterServer was not found”: mshtml.dll; shdocvw.dll; browswui.dll.
- “Failed to load”: msxml.dl; gpkcsp.dlll
- “entry-point DllRegisterServer was not found”: mshtml.dll; shdocvw.dll; browswui.dll.
- When running a withdraw installation file for a printer and when running some of the Windows updates, the keep informed fails as it states MFC120u.dll is missing from your computer.
https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/while-trying-to-run-a-program-i-get-a-message-that/570589a4-01c8-4486-b3e1-b767ee7c3e1d – it is in System32 folder. I have updated and repaired Ocular C++ 2013 lucratively but
cannot install 2015 x64 account and the problem persists.
I appreciate quite a list of issues here. Any help would be greatly appreciated.
Just changed an AMD motherboard to Intel, now will not boot. This is on OEM Windows 10. Computer does not have optical drive.
Do I need to install a new story of Windows 10?
Does Microsoft provide a new key as OEM story already purchased.