MS hold says they are pre-installed on W-10 and they can not help with any information about them – seems to me that they are coming from MS – and whoever puts them out mut know the basis details.
I love the pictures but would really like to know the details – I asked whether I like them but MS will not tell me what they are – really 🙁
The downloading of this fill in started but it is paused at the 0% and does not do anything. Read More
Running Windows 10, Chrome, Google, Office 365 Outlook, Acer desktop. I just downloaded some photos from my email. They opened in Paint.net instead of Windows Photo Witness as all my photos have always done. I went ahead and saved them to a folder. Now
all my pictures open in Paint.net. All the pictures I’ve ever save in the past now open in Paint.net. Paint.net and me are not compatible. I never use Paint.net. I Googled “change default viewer” and went
HERE and followed those instructions. That didn’t succeed for me. What have I done to screw up my orderliness so badly? Perhaps more importantly, how do I get back to Windows Photo Viewer? All ideas, suggestions, comments will be greatly appreciated. Thanks, K. Read More
I installed Windows 10 during its free improve period, but I went back to 8.1 just in case it didn’t job out well. Now I’m advancement my PC, and the most up to date OS seems like a good gadget to have. If I installed it during the distress, will I be able
to get it again now? Read More
Windows 10 fill in problem with using my data. I have limited dated, so must fill in over free wi-fi. It takes hours!
Windows 10 renew problem with using my data. I have limited dated, so must renew elsewhere over free wi-fi. It takes hours! I do this every week or two. I often run out of schedule and have to leave whatever coffee office block I am mooching data off, meaning the
updates often do not finish. After I returned home the past, to my own data connection, my computer used 1.5G data, obviously from the renew finishing.
Question 1: How do we fly up this very schedule-consuming bi-quarterly renew process? I am not a computer geek and it should not be this hard.
Question 2: How do I keep this renew process from eating up my data, even though everything is curved to disable after I return to my limited data connection?
I have a Dell Vostro 3700 laptop, my Windows 7 Professional recently just crushed unpredictably, and it does not want to boot up.
As a computer expert, I would say that it seems Windows crushed because of a hard drive problem, and my Windows 7 is NOT recoverable (don’t care, there isn’t anything important on my laptop).
I still have the original product key but no installation disc or anything to help me reinstall Windows, so I was wondering if it would be possible for me to get a copy of Windows 7 Professional as an ISO file and use my existing product key?
Performed these updates 1-10-2017:
Windows Malicious Software Removal Device for Windows 8, 8.1, 10 and Windows Wine Waiter 2012, 2012 R2, 2016 x64 Edition – January 2017 (KB890830)
Security Renovate for Adobe Flash Player for Windows 10 Adaptation 1607 (for x64-based Systems) (KB3214628)
Cumulative Renovate for Windows 10 Adaptation 1607 for x64-based Systems (KB3213986)
Performed this renovate 1-11-2017:
Realtek Semiconductor Corp. – MEDIA – 11/15/2016 12:00:00 AM – 184.108.40.20689
I bought new laptop and as expected it was powered by windows 10. I think its great at first but it keeps on pissing me of especially the installed apps. I cant find all the apps I installed in google play, all I can see is the apps I get from the save,
but whenever I’m checking in google play it says the apps I want is already “installed” so the question is where it is?
where could I fin the apps I installed from google play? can someone help me with this . ill be more than pleased if someone could help me with this. thanks
How do I defer automatic download of Windows 10 bring up to date e.g when on board boat where very expensive wifi Read More
My PC seems to have gone into melt down this week. Can not open the launch menu, tried the fix it from this website but didn’t succeed. I also have problems with cortana and search within it won’t let me style. Can not make new entries on calendar as can’t
style. Date and calendar on toolbar nothing happens when I hover or click it. I can’t open settings to do updates or anything else. (it took me a few days to find how to get into this. If I could only try install an keep informed this may fix some of the problems?
Help!! Read More
Failed installing of Cumulative Renew for Windows 10 Adaptation 1607 for x64-based Systems (KB3213986) – Error 0x80072af9
Failed installing of Cumulative Keep Informed for Windows 10 Report 1607 for x64-based Systems (KB3213986) – Error 0x80072af9.
Existing Build 14393.576.
Everybody, please help on this error on this update?
Please l need to have the window defender bowed on. When l try to transform on am advised to contact the group security administrator. That is why l have contacted the group security administrator.
Original championship: Windows Defender
<Moved from Windows>
I can’t seem to get people to be with you in my earlier post. I upgraded from windows 10 home to windows 10 pro from the windows put in storage but then I had to reinstall my OS so I reinstalled windows 10 home. Now I want to know if I can re-improvement to windows
10 pro without having to pay for it again at the windows put in storage. Read More
I have this phone. It facility great. But now it says low cargo space on phone memory. I have moved all apps that can be moved to the SD card.
System is 6.24 GB. apps and games 3.57 gb. in apps and games watsapp is 3.18gb, skype 112.33 mb,music 61.57 mb one drive41.64 mb, video recorder 24.34 mb, messenger 20.04 mb, games 12.99 mb, calendar 9.56 mb, battery saver 7.37 mb, podcasts 5.10 mb.
My watsapp has stopped up downloading messages.
What to do to get more cargo space on phone memory… PLEASE PROPOSE AND HELP.
Hello there. I’ve recently installed new Win 8.1 on my second computer.
And while it was being installed I didn’t connect it to my router.
When the installation was over. Everything was in order except,
that the network shows Limited Network and I have Ethernet.
Cable is fine. So i router. Windows does the restart of the router.
Keep in mind I have used Windows from Win95.
Realtek driver was installed with the Windows itself.
I have my main Computer connected to the same router.
And everything facility fine. I’ve tried switching cables.
Reinstalling Win8.1 with cable plugged in.
Tried obtain ip automatically, tried and checked was the network enabled or not.
When I unplug the cable it shows Network icon with red X. When I fork it on it shows limited network.
Renew and Release too. Once I had same problem with Win 7, on my old computer.
But I forgot how to decipher it. The suspension is probably some minor bug.
Or maybe clean 8.1 does not recognize my Thomson router, but why does it display limited network I have no clue.
Pls help if you can thank you.
***Post moved by the moderator to the appropriate forum category.***
I just started updating my PC, everything was normal for few minutes till I looked back on monitor and I saw the loading feature bugged (the dots that spins in circle)
And the font changed to bold. But the % are still going up. Btw it is prerelease inform maybe it is because of that or it is
something other ? Read More
hi I am getting frequent blue screen of death with a bad pool header error on a Dell Optiplex 990 SFF Core i5 3.10GHz 8GB RAM 500GB HDD Windows 10 PC Desktop that I just bought from ebay
the trader is not replying and I have 11 days to time lag turn over ebay can stair in to do a return so I am wondering if anyone can talk/walk me through a diagnostics or a fix please
I am no longer able to open Edge or to use the Windows 10 search feature. I tried all the Wizards, DISM etc. I tried to reinstall Windows 10 and I couldn’t do it without all the apps being removed as well. I tried to add another account administrator
without star, since I didn’t have the password they prompted me for because I don’t have a password to my computer to begin with. Nothing helped. In safe mode the problem still persists. I tried a clean boot with the msconfig and both the “Normal Startup”
and “Diagnostic Startup” immediately default to “Selective Startup”. There is definitely something amiss on my PC. I have used PCs since 1984 and I am stumped. Several experts have told me that in Windows 10 many experience this malady. I have used Windows
10 now for over a day without problems. The install of Windows 10 was over an existing Windows 7 platform.
I’m opening a new area, as the initial issue is gone for me.
My first issue was like as this one:
*** What I did: ***
–> I ran “DISM…” et “SFC /scannow”, without winner (processes don’t finish properly).
–> I started the native MS Windows Modernize Troubleshooter.
–> I started all tools provided by the WUReset script :
*** What’s happening now ***
–> Now, when trying to modernize my computer, I’m told that no modernize is available.
–> If I try to install latest cumulative modernize (KB3213986 – 14393.693) with the Microsoft Catalog bracket-alone installer, it fails saying that my computer don’t need this modernize while I’m currently running build 14393.447 (november cumulative modernize).
–> When I run DISM, it fails at 4.5% saying that component lumber room is corrupted (0x80073712 – STATUS_SXS_COMPONENT_STORE_CORRUPT).
–> “SFC /scannow” command won’t run, displaying that command can’t be executed.
Please find below logs parts containing errors for both DISM and SFC commands :
I don’t want to reinstall Windows, as I have many apps installed and lots of settings.
How can I repair WU components and modernize my computer again?
Thanks a lot in advance!
Regards from France,
I am having a problem of late with my laptop freezing if no windows keep informed restart is being done.
I am a data scientist which requires my laptop to run for at least 8 hours a day. Sometimes, the laptop has to request for keep informed restart in the beginning of the day which I usually ignored until the end of the day.
However, of late, the routine will crash if there is an keep informed restart pending. I could only lever my laptop’s LED backlight, the other function of even the mouse would not move.
I am currently using ACER laptop with routine info of:
Acer Aspire M3-581TG
Intel Core 5i-3317U @1.7GHZ
Windows 10 Home x64 bit
NVDia GForece 640M
Thanks for your attention.
I accidentally deleted WMP 12. (could not find it in apps to uninstall). I want to re-install it but can’t find any way to do that. HELP! Read More
It tried to download windows 10 from a skylight 7 now it wont let me login has an error message, help?
<Original Title: Help>
why will my lenovo windows 7 not bring up to date, it has been over 7 months since it’s last update?
Lenovo computer with windows 7 will not modernize, and has not updated for 7 months ever since trying to advance to windows 10. Any ideas? Read More
in multiple users how can i find the administrator account out of them ?
I keep getting message
Error ID: 0x8DE00005
I am not computer literate to make the required change to Outlook and save my old emails – or open a new Outlook set up.
I have never had issues with live mail before, and have several legal emails saved on my old site.
On this pc there is a “back” icon in the commission bar, but no matter how many times a click nothing happens. I can also not right click on the desktop, nothing happens
If I try to drag a folder from file explorer to the desktop it is copied without error, but nothing shows up on the desktop. I have checked if there are other desktop created, but there is not.
I installed a second 500GB Drive in the PC formatted it and trying to create a mirrored image. I had a hard drive failure and after the re-installation and reconfiguration I want to mirror it and leave it in the pc incase of a future hard drive failure
and to save time. However Windows will allow the drive to be formatted, and I can configure anything but the New Mirrored drive. It will not allow to go to next at you select the drive. Any suggestions on this issue? There is old threads but nothing about
how to drive around this issue. Read More
HomeGroup moving part fine when all computers are setup at the same while. Unfortunately, I had to reinstall Windows 10 on one machine which messed up everything. I’ve gone back through and removed the original HomeGroup from the other two computers and after
some product managed to get HomeGroup back on two. The third is being a problem:
It seems to locate HomeGroup and asks if I’d like to join. It says “Verifying Password” (linger an eternity), then asks for the password. I manner the password and linger again for an extraordinarily long while to receive the message “Windows doesn’t find a HomeGroup
on this network”. One is already created and running well on two other machines on the same network.
Anyone have a solution? Fortunately, this is my field laptop but it would make my life easier to have access.
I love using Windows 10, but the mania that I just can’t comprehend is the scheme auto rebooting to install updates.
It’s the most frustrating mania ever when I have multiple tabs, folders and files open when the restart happens.
This is so frustrating, I want to preach to the lead engineer who was responsible for this particular feature of Windows (why, just why?!).
Ok, I’m done with my ranting. My question is how do I go around the incompetent scheduling option to completely disable Windows from restarting.
I’m on Windows 10 and I’m struggling to connect on internet with my huawei e160 modem. It does pick-up the network but still can’t connect to the websites.
I’m using Acer Aspirel XC 704 desktop and based on South Africa
What can I do to work out this problem?
Please help me, I am using my laptop OS Windows 10 and my problem is that my EPSON L360 printer won’t print documents using 8.5 by 13 bond paper.
Please help me, I am using my laptop OS Windows 10 and my problem is that my EPSON L360 printer won’t print documents using 8.5 by 13 bond paper. Read More
I have tried all the fixes, troubleshooters, etc. for hours now- nothing plant. I cannot inform or install any apps from the Windows Keep. None of the fixes have worked, scannow shows nothing sin, cannot run DISM commands- they are unrecognized,
troubleshooter shows Windows Inform Database possibly corrupted. It seems my only option is to uninstall and re-install Windows 10 updates. Read More
Windows 10 boots up with black screen with blinking cursor and then loads up windows like normal (why is their a black screen)
This PC has been function perfectly fine for a while it is a gaming PC. When I fit on the power button it boots up to a black screen for like 5 seconds then loads where I can road sign in and it will load. Why is that black screen there in the first place it
wasn’t there when I bought it several months ago. From what I have gathered from research is that it could be a hard drive problem or software problem. Things I have done are set the c: hard drive first in BIOS which has windows on it. I opinion it possibly
could be a illness so I refreshed my pc and it is still doing the same thing. I do not know what else to do. I have tried advance effort assassination, method restore, going into the command prompt to rebuild bios, the surprise up repair kit which says it couldn’t
repair, going into safe mode. Nothing has helped. Any idea what is happening? Read More
I’m having a very frustrating problem that I can’t find the root of. We are in the process of moving our build machine from one arrangement to another. The build process is a Assignment that runs at 6 am. It calls a batch file, sets an environment value for MSBUILD
and then calls a C# program. That program then builds various embedded projects (using make), Windows C# apps and NSIS Installers and copies them up to a server.
On the old build machine (Windows 10, previously Windows 7 Pro that we performed an improvement on), this all worked fine. I set up the new build machine and it’s not function properly, at all. If I open up the command prompt and manually run the script from
there everything machinery great. As soon as I run it from the Assignment many of the embedded projects fail. It’s almost like they can’t find the file… even though they are being fed the direct path.
I’m running the command prompt and the Assignment as the same punter. The assignment is identical to whats on the old machine (I exported it there and imported in here). I’ve tried changing just about every background in the assignment (logged in vs always, highest priv vs normal,
etc) as other posts have suggested. I’ve tried running the assignment as the domain administrator and I even went into the makefile and printed out every distinct punter or environment changeable and they are the same whether I run from the Assignment Scheduler or command
The printed out error is:
/usr/bin/sh: C:\WinAVR-20100110\bin\avr-gcc: command not found
Except the path exists and I gave every punter full control over it. The punter I’m using is even an admin on the machine.
If it failed no matter what, that I could absorb. The fact that it machinery fine from the command prompt (a non-elevated command prompt, mind you) and not from the Assignment Scheduler when this exact same set up machinery on the old build machine is extremely confusing
… Anyone have any ideas on where to look next? What am I missing?
AcroMissingCompWClass: AcroRd32.exe – Application Error
The instruction at 0x5f67525c referenced memory at 0x00000000. The memory could not be read.
I get this error when I try to print an attachment in Windows Live Mail 2012 using Adobe Reader DC.
This is a new error when it updated Jan 10, 2017.
The latest updates of Windows 10 appear to have removed the options to fold down or restart without installing updates (so no options in the shrink menu or with Win-D then ALT-F4). Likewise the command prompt command: “shutdown
-r -t 0″ no longer working to restart the computer without installing updates.
Today I lost 3 hours while in the offing for my computer to install updates. I had a program which could no longer access the clipboard (it does that IDK why) the explanation is always to just restart. It is preventable
to force me to install updates on any particular restart because I restart at the end of every workday anyway.
Follow up: If there is no longer anyway to restart without installing updates then I will have to disable updates entirely to prevent this chaos. (I will remember to reactivate updates from stretch to stretch, I have always kept my machines up to date in the past).
So how can I completely disable updates?
My computer is running so unhurriedly that if any slower it would be in reverse !
I want to get rid of unsolicited stow on my disc. Most of it I know about but not this one: “Service Pack Backup Files” – it says, “If you delete the files you won’t (sic!) be able to uninstall the Good Turn Pack later”. There are 920 MB in there !! What
will happen if I delete them. Will my computer run more efficiently or will I have done unimaginable damage? Information please.
Windows Photo Eyewitness can’t open this picture because either Photo Eyewitness doesn’t bear out this file format, or you don’t have the latest updates to Photo Eyewitness
Please help as these photos are very important:
I have recovered deleted photo’s of a usb flash drive and i cannot open them, i have tried changing the default program and have done a Method File Checker scan which said nothing was criminal. I do not know what to do and i really need help.This is on windows
10 and they are all JPG files
The last 2 months, I have had harass with the Windows 10 Updates downloading and installing. Last month, I ran the Troubleshooting Fix problems with Windows Renew, and it Fixed the issues. This month, the same event happened and I ran the Troubleshooting
again. It fixed 3 issues, installed 3 updates, and says my computer is up to date. But the Troubleshooting did not fix one issue — Potential Windows Renew Database error detected — Repair Windows Renew Database Corruption – Not Run. What does this mean
? Read More
I bought a new desktop with windows 10. I installed outlook 2016. I need to copy the emails that I have on my old desktop windows xp. The old computer has outlook express. I need this explained to me in austere language. I do not want to use outlook.com.
My windows 10 modernize Cumulative Modernize for Windows 10 Edition 1607 for x64-based Systems (KB3213986) strucked at 95%, not moving more than that, I tried many times but no use.
please help me anybody
Starting on Tuesday, January 10, 2017, the familiar monthly “Patch Tuesday” updates arrived for my Windows 10 Pro 64-bit laptop.
Everything downloaded and effectively installed EXCEPT for the following:
Critical Fill In for SQL Maitre D’ 2016 MSVCRT Prerequisites KB3164398
The error, which has happened each spell I click Retry on the Windows Fill In screen, is the following
1. Is there a place I can go to get a edition of KB3164398 that, different the one meeting in the Windows Fill In “pending” queue, will actually install?
2. How can I remove that “update” from the pending queue (in case the answer to question #1 indicates there is no such masterpiece-around)?
Okay, when I searched this on Google, people think the problem is that I don’t want to put your signature on in after putting my computer to sleep. This is
not the problem. The problem is that after I put your signature on in, everything that was open was closed, instead of staying open. This only just started happening, while I’ve had this computer for a while. What may also be happening is that the computer
rebooted before waking up, but I’m not sure if it’s that or just logging off. If someone can tell me the difference, I can say which it is.
If it helps, I’m using an HP Pavilion x360 m3, running Windows 10 Home Insider Preview build 14931.rs_prerelease.160916-1700
i have a Windows 10 Home practice with the following Windows Defender configuration:
Antimalware Client Form: 4.10.14393.0
Engine Form: 1.1.13407.0
Antivirus definition: 220.127.116.11
Antispyware definition: 18.104.22.168
Network Inspection Practice Engine Form: 2.1.12706.0
Network Inspection Practice Definition Form: 22.214.171.124
My client says that Formulate files sent from my laptop have illness issues, but my laptop cant trace any virus
But If i run a scan on 33 files for example, the result shows that 520 files have been scanned. I do not know but the reason
Does that mean that my laptop has illness issues that cant be traced by defender? pl clarify